Solar Aeration System with Battery Backup

Current Stock:
SLA-B AquaBio Series
$0.00 (Fixed Shipping Cost)

The SLA-B AquaBio Series Solar Aeration System is a professional-grade solar aeration system designed to provide high-volume, reliable aeration for remote and off-grid ponds and lakes. It is designed to operate efficiently even in times when little to no sunlight is available.

Aquatic Biologists, Inc. recommends this system for use in ponds up to 1 acre in size with depths of 5 to 10 feet. This recommendation is dependent on the placement of diffusers, depth of the water pond and overall aeration goals.

Each unit is ruggedly built using high-quality components that have a a proven history of durability. In addition to industry-leading quality, the SLA-B AquaBio Series is loaded with common-sense features exclusive to U.S. Solar Mounts and not available on any competitive unit. American-Made materials are used throughout this system to ensure reliable, trouble-free operation for years to come. These systems are easily installed using just a few basic hand tools.

Features Include:

  • 100% Engineered and Built in the USA
  • Ultra-Quiet Brushless DC Compressor
  • Super-Efficient MPPT Solar Charge Controller
  • (2) AquaBio Six Shoot Diffuser (Stainless Steel)
  • (2) 100' rolls of 1/2" Self Sinking Air Hose
  • Thermally Insulated Battery Compartment
  • Lexan protective cover for Battery Section
  • Fully Programmable Digital Run Time Controller
  • Low-Voltage Battery Disconnect
  • Circuit Breakers - No Fuses
  • 100% Factory Tested to ensure the highest quality possible
  • Complete Standard Warranty
  • Orders placed by phone paid by check or wire transfer receive a 3% discount! Orders placed by phone will be shipped after payment has cleared.

Customer will need provide a 4" x 10' schedule 40 structural galvanized pipe to mount solar panel. Manufacturer recommends pipe be secured with concrete to a depth of 5 feet. Unit should be installed/positioned where sunlight will not be blocked by buildings, trees, bushes, etc.

U.S. Solar Mounts System Exclusive Features

Tilt-Out Control Section - Entire pump section swings out for access to every component

Dual Adjustable Flow Balancing Controls - Precision needle valves with flow indicator gauges

Automatic Spreed Reduction (ASRTM) - Reduces power consumption by up to 25% during times of low or no sunlight

Enclosure is Pole-Mounted - Keeps the unit off the ground - away from dust, dirt & rodents


Power & Electrical

Solar Module(s) 2, 100-Watt Modules Standard
Racking Fully Adjustable Top-of-Pole, Various Options Available
Batteries Sealed GEL Deep Cycle, 2 or 4 Depending on Model (Replacements Available At Most Automotive Parts Stores)
Charge Control MPPT Algorithm, Temp Compensated
Low Battery Yes - With Automatic Re-Start
Circuit Protection DC Circuit Breakers
Tun Time Controller Digital 7 Day, Fully Programmable Run Times



Type Rocking Piston Brushless DC Compressor
Max Flow Rate 1.8 / 3.6 SCFM, Depending on Model
Over-Pressure Brass Automatic Pressure Relief Valve
Flow Balancing Dual Flow Gauges with Stainless Steel Precision Needle Valves
Sound Level <30db - Measured at 6'


Thermal Management

Air Intake Door-Mounted, Replaceable Filters w/Rain Hood
Enclosure Cooling Thermostat-Controlled Active Ventilation
High-Temp Yes-With Automatic Re-Start
Compressor Dedicated Compressor Cooling Fan


Air Distribution

Diffuser AquaBio Six Shoot Diffuser (Stainless Steel)
Air Lines 1/2" Inner Diameter Self-Sinking Airhose


Materials & Finishes

Enclosure Welded and Powder Coated Steel
Steel Components High-Strength, Baked-On Polyester Power Coat
Aluminum Rails 6360T6 Anodized  0.2-.25mil Thickness
Codes and Standards

Structural     ASTM A36, A53

Galvanizing  ASTM A123M

Plating        ASTM B633

Enclosure Weight 175 Pounds (No Batteries)
Coverage Typically up to 2 Acres per Unit

All specifications subject to change at any time without notice.